Temperature & humidity detectors
High Temperature Detector
The Aqualarm detector is capable of sending an alarm signal to the control panel for two seperate alarm points . The alarm points are entered into the detector via a simple plugin programmer (supplied). These points can be changed by the user as required.
The detector is capable of being monitored by any of the Detek control panels. The detector is not available as a 24V stand alone unit.
Humidity Level Detector
The Aqualarm humidity detector sends an alarm signal to the control panel should the humidity set level be exceded. The level required is set via an integral scale adjuster. Levels can be set between 30% and 100%.
The detector is capable of being monitored by any of the Detek control panels. The detector is not available as a 24V stand alone unit.
Specifications
Temperature detector - TD2-12
Normal operating voltage: 12v d.c.
Test / alarm voltage: Not less than 13v d.c.
Quiescent current: <20mA per detector
Test / alarm current: <150mA per detector
Temperature range: -20 to +70 °C
Recommended interconnecting cable: 4 core 0,5mm squared screened (type CY)
Recommended maximum lengt: 100m
Line-out voltage drop: 1.5mV/m
Height: 108mm
Width: 165mm
Depth: 47mm
Humidity detector - HD-12
Normal operating voltage: 12v d.c.
Test / alarm voltage: Not less than 13v d.c.
Quiescent current: <10mA per detector
Test / alarm current: <100mA per detector
Recommended interconnecting cable: 2 core 0,5mm squared screened (type CY)
Recommended maximum length: 100m
Line-out voltage drop: 1.5mV/m
Height: 108mm
Width: 165mm
Depth: 47mm